U.S. export codes (Schedule B)

Schedule B chapter 44: Wood and articles of wood; wood charcoal

272 ten-digit Schedule B numbers are listed in chapter 44. Open a code to see its unit of quantity, the international HS code your buyer will use, when EEI is required and the main U.S. export markets.

  • 4401.11.0000Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms, coniferous
  • 4401.12.0000Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms, nonconiferous
  • 4401.21.0000Wood in chips or particles, coniferous
  • 4401.22.0000Wood in chips or particles, nonconiferous
  • 4401.31.0000Wood pellets
  • 4401.32.0000Wood briquettes
  • 4401.39.0100Sawdust and wood waste and scrap, agglomerated in logs, briquettes or similar forms excluding pellets
  • 4401.41.0000Sawdust, not agglomerated
  • 4401.49.0000Wood waste and scrap, not agglomerated, n.e.s.o.i.
  • 4402.10.0000Wood charcoal (including shell or nut charcoal), whether or not agglomerated, of bamboo
  • 4402.20.0000Shell or nut charcoal, whether or not agglomerated
  • 4402.90.0100Wood charcoal (including shell or nut charcoal), whether or not agglomerated, other than of bamboo or shell or nut
  • 4403.11.0030Wood poles, piles and posts, coniferous, treated with paint, stain, creosote or other preservatives
  • 4403.11.0060Wood in the rough, coniferous, treated with paint, stain, creosote or other preservatives, n.e.s.o.i.
  • 4403.12.0030Wood poles, piles and posts, nonconiferous, treated with paint, stain, creosote or other preservatives
  • 4403.12.0060Wood in the rough, nonconiferous, treated with paint, stain, creosote or other preservatives, n.e.s.o.i.
  • 4403.21.0110Pine (pinus) poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.21.0120Pine logs and timber, southern yellow, long/short leaf, pitch, slash, virginia, rough, not treated, cross-sectional dimension 15 cm (5.9 in) or more
  • 4403.21.0125Ponderosa pine (pinus ponderosa) logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.21.0130Pine (pinus) logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, n.e.s.o.i.
  • 4403.21.0165Pine (pinus) wood in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, n.e.s.o.i.
  • 4403.22.0110Pine (pinus) poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.22.0120Pine logs and timber, southern yellow, long/short leaf, pitch, slash, virginia, rough, not treated, cross-sectional dimension less than 15 cm (5.9 in)
  • 4403.22.0125Ponderosa pine (pinus ponderosa) logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.22.0130Pine (pinus) logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), n.e.s.o.i.
  • 4403.22.0160Pine (pinus) wood in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), n.e.s.o.i.
  • 4403.23.0110Fir (abies) and spruce (picea) poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in
  • 4403.23.0135Spruce (picea) logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.23.0142Fir, balsam logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, n.e.s.o.i.
  • 4403.23.0165Fir (abies) and spruce (picea) wood in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, n.e.s.o.i.
  • 4403.24.0110Fir (abies) and spruce (picea) poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is less than 15
  • 4403.24.0135Spruce (picea) logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.24.0142Fir, balsam logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), n.e.s.o.i.
  • 4403.24.0160Fir (abies) and spruce (picea) wood in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), n.e.s.o.i.
  • 4403.25.0110Coniferous wood poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, neso
  • 4403.25.0140Douglas-fir (pseudotsuga menziesii) logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.25.0150Western hemlock (tsuga heterophylla) logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.25.0155Western red cedar (thuja plicata) logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.25.0160Coniferous logs and timber in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, n.e.s.o.i.
  • 4403.25.0165Coniferous wood in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, n.e.s.o.i.
  • 4403.26.0110Coniferous wood poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), ne
  • 4403.26.0140Douglas-fir (pseudotsuga menziesii) logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.26.0150Western hemlock (tsuga heterophylla) logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.26.0155Western red cedar (thuja plicata) logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.26.0160Coniferous logs and timber in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), n.e.s.o.i.
  • 4403.26.0170Coniferous wood in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), n.e.s.o.i.
  • 4403.41.0000Dark red meranti, light red meranti and meranti bakau wood in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated
  • 4403.42.0000Teak wood in the rough, whether or not stripped of bark or sapwood, or roughly squared, not including lumber of heading 4407
  • 4403.49.0200Tropical wood, n.e.s.o.i., wood in rough, not treated
  • 4403.91.0020Red oak wood in the rough, whether or not stripped of bark or sapwood, or roughly sqaured, not treated
  • 4403.91.0040Oak except red oak wood, in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated
  • 4403.93.0100Beech (fagus) wood in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.94.0100Beech (fagus) wood in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.95.0127Birch (betula) poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more
  • 4403.95.0130Birch (betula) wood in the rough, not treated, of which any cross-sectional dimension is 15 cm (5.9 in) or more, n.e.s.o.i.
  • 4403.96.0127Birch (betula) poles, piles and posts in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in)
  • 4403.96.0140Birch (betula) wood in the rough, not treated, of which any cross-sectional dimension is less than 15 cm (5.9 in), n.e.s.o.i.
  • 4403.97.0026Poplar and aspen (populus) poles, piles and posts in the rough, not treated
  • 4403.97.0075Yellow poplar (liriodendron tulipifera) wood in the rough, not treated, n.e.s.o.i.
  • 4403.97.0077Poplar, aspen or cottonwood in the rough, not treated, n.e.s.o.i.
  • 4403.98.0000Eucalyptus (eucalyptus) in the rough, not treated
  • 4403.99.0123Nonconiferous pulpwood in the rough, not treated, n.e.s.o.i.
  • 4403.99.0128Nonconiferous poles, piles and posts in the rough, not treated, n.e.s.o.i.
  • 4403.99.0140Ash (fraxinus) wood in the rough, not treated, n.e.s.o.i.
  • 4403.99.0150Western red alder (alnus rubra) wood in the rough, not treated, n.e.s.o.i.
  • 4403.99.0155Cherry (prunus) wood in the rough, not treated, n.e.s.o.i.
  • 4403.99.0160Maple (acer) wood in the rough, not treated, n.e.s.o.i.
  • 4403.99.0170Walnut (juglans) wood in the rough, not treated, n.e.s.o.i.
  • 4403.99.0175Paulownia (paulownia) wood in the rough, not treated, n.e.s.o.i.
  • 4403.99.0195Wood, in the rough, not treated, nonconiferous, n.e.s.o.i.
  • 4404.10.0040Fence pickets, palings and rails of coniferous wood, pointed but not sawn lengthwise
  • 4404.10.0095Hoopwood; split poles; piles and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed suitable for mfg; chipwood coniferous
  • 4404.20.0040Fence pickets, palings and rails of nonconiferous wood, pointed but not sawn lengthwise
  • 4404.20.0095Hoopwood; split poles; piles & stakes of pointed wood not sawn lengthwise; wooden sticks roughly trimmed fr mfg umbrellas etc; chipwood, nonconiferous
  • 4405.00.0000Wood wool (excelsior); wood flour
  • 4406.11.0000Railway or tramway sleepers (cross-ties) of coniferous wood, not impregnated
  • 4406.12.0000Railway or tramway sleepers (cross-ties) of nonconiferous wood, not impregnated
  • 4406.91.0000Railway or tramway sleepers (cross-ties) of coniferous wood, impregnated
  • 4406.92.0000Railway or tramway sleepers (cross-ties) of nonconiferous wood, impregnated
  • 4407.11.0001Pine (pinus), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), finger-jointed
  • 4407.11.0002Pine (pinus), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), treated with paint, stain, creosote or other preserv
  • 4407.11.0042Eastern white pine (pinus strobus), red pine (pinus resinosa), sawn/chip lengthw sliced/peeled thickness gt 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.11.0043Eastern white pine (pinus strobus), red pine (pinus resinosa), sawn/chip lengthw sliced/peeled thickness gt 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.11.0044Lodgepole pine (pinus contorta), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.11.0045Lodgepole pine (pinus contorta), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.11.0046Southern yellow/long leaf/pitch/short leaf/slash/ virginia pine sawn/chippd lengthwise, of a thickness over 6 mm (0.236 in.) rough, not treated n.e.s.o.i.
  • 4407.11.0047Southern yellow/long leaf/pitch/short leaf/slash/virginia pine, sawn or chipped lngthwise, of a thickness over 6 mm (0.236 in.), not treated, n.e.s.o.i.
  • 4407.11.0048Ponderosa pine (pinus ponderosa), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.11.0049Ponderosa pine (pinus ponderosa), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.11.0052Pine wood, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.11.0053Pine wood, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.12.0001Fir (abies) and spruce (picea), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), finger-jointed
  • 4407.12.0002Fir and spruce, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), treated with paint, stain, creosote, other preserv
  • 4407.12.0017Sitka spruce (pices sitchensis), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.12.0018Sitka spruce (pices sitchensis), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.12.0019Spruce, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.12.0020Spruce, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.12.0058Fir (abies), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.12.0059Fir (abies), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.13.0000Mixtures of spruce/pine/fir (s-p-f) sawn/chipped lengthwise, sliced/peeled, thickness over 6mm, not treated with paint, stain, creosote, other preserv
  • 4407.14.0000Mixtures of western hemlock/amabilis fir (hem-fir) sawn/chipped lngthw, sliced/peeled, gt 6mm thck, nt treated w paint, stain, creosote, other preserv
  • 4407.19.0001Coniferous wood, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), finger-jointed
  • 4407.19.0002Coniferous wood, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), treated with paint, stain, creosote, other preserv
  • 4407.19.0054Douglas-fir, sawn or chipped lengthwise, sliced or peeled, of a thickness gt 6 mm (0.236 in) rough, min dimens lt 5.1 cm (2.008 in) not treated n.e.s.o.i.
  • 4407.19.0055Douglas-fir, sawn or chipped lengthwise, sliced or peeled, thickness gt 6 mm (0.236 in) rough, min dimens 5.1-12.7 cm (2.008-5 in) not treated n.e.s.o.i.
  • 4407.19.0056Douglas-fir, sawn or chipped lengthwise, sliced or peeled, of a thickness gt 6 mm (0.236 in) rough, min dimens gt=12.7 cm (5 in) not treated n.e.s.o.i.
  • 4407.19.0057Douglas-fir, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.19.0064Hemlock (tsuga), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.19.0065Hemlock (tsuga), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.19.0066Larch (larix), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.19.0067Larch (larix), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.19.0068Western red cedar (thuja plicata), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.19.0069Western red cedar (thuja plicata), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.19.0074Yellow cedar (chamaecyparis nootkatensis), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated n.e.s.o.i.
  • 4407.19.0075Yellow cedar (chamaecyparis nootkatensis), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.19.0076Cedar (thuja, juniperus, chamaecyparis etc) sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in) rough, not treated n.e.s.o.i.
  • 4407.19.0077Cedar (thuja, juniperus, chamaecyparis etc) sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in) not treated n.e.s.o.i.
  • 4407.19.0082Redwood (sequoia sempervirens), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.19.0083Redwood (sequoia sempervirens), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.19.0092Coniferous wood, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), rough, not treated, n.e.s.o.i.
  • 4407.19.0093Coniferous wood, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), not treated, n.e.s.o.i.
  • 4407.21.0000Mahogany (swietenia spp), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
  • 4407.22.0000Virola/ imbuia and balsa wood sawn or chipped lengthwise, sliced or peeled, whether/not planed, sanded or finger-jointed
  • 4407.23.0100Teak wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
  • 4407.25.0000Dark red meranti, light red meranti and meranti bakau wood sawn or chipped lengthwise, sliced or peeled, whether or not planed sanded,thickness > 6mm
  • 4407.26.0000White lauan, white meranti, white seraya, yellow meranti and alan, wood sawn or chipped lengthwise, sliced/peeled,thickness over 6mm
  • 4407.27.0000Sapelli aka sapele wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
  • 4407.28.0000Iroko wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, n.e.s.o.i.
  • 4407.29.0200Tropical wood, wood sawn or chiped lengthwise, sliced or peeled whether or not planed, sanded etc,thickness>6mm non coniferous
  • 4407.91.0022Red oak wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
  • 4407.91.0063Oak wood except red oak wood, sawn or chipped lengthwise, sliced or peeled, wh/nt planed, sanded or end-jointed, of a thickness exceeding 6 mm, n.e.s.o.i.
  • 4407.92.0000Beech wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, n.e.s.o.i.
  • 4407.93.0010Hard maple wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, n.e.s.o.i.
  • 4407.93.0020Maple wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, n.e.s.o.i.
  • 4407.94.0000Cherry wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, n.e.s.o.i.
  • 4407.95.0000Ash wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, n.e.s.o.i.
  • 4407.96.0000Birch (betula), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in)
  • 4407.97.0072Yellow poplar (liriodendron tulipifera), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in)
  • 4407.97.0079Poplar; aspen; cottonwood, sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in), n.e.s.o.i.
  • 4407.99.0242Hickory (carya) and pecan (carya illinoensis, carya pecan), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in)
  • 4407.99.0261Walnut (juglans), sawn or chipped lengthwise, sliced or peeled, of a thickness of a thickness over 6 mm (0.236 in)
  • 4407.99.0263Western red alder (alnus rubra), sawn or chipped lengthwise, sliced or peeled, of a thickness over 6 mm (0.236 in)
  • 4407.99.0295Nonconiferous wood, sawn or chipped lengthwise, sliced or peeled, of a thickness of a thickness over 6 mm (0.236 in), n.e.s.o.i.
  • 4408.10.0100Veneer sheets and sheets for plywood and other wood sawn lengthwise, sliced or peeled, thickness not over 6 mm, coniferous
  • 4408.31.0100Veneer sheets & sheets for plywood of dark/light red meranti & meranti bakau wood sawn lengthwise, sliced or peeled, thickness not exceeding 6mm
  • 4408.39.0200Veneer sheets and sheets for plywood and other wood sawn lengthwise, sliced or peeled, thickness not over 6 mm, tropical wood, n.e.s.o.i.
  • 4408.90.0105Ash veneer sheets and sheets for plywood and other wood, sawn lengthwise, sliced or peeled, thickness not exceeding 6 mm, spliced or end-jointed
  • 4408.90.0110Birch veneer sheets and sheets for plywood and other wood, sawn lengthwise, sliced or peeled, thickness not exceeding 6 mm, spliced or end-jointed
  • 4408.90.0115Cherry wood veneer sheets & sheets for plywood and other wood, sawn lengthwise, sliced or peeled, thickness not exceeding 6 mm, spliced or end-jointed
  • 4408.90.0121Maple veneer sheets and sheets for plywood and other wood, sawn lengthwise, sliced or peeled, thickness not exceeding 6 mm, spliced or end-jointed
  • 4408.90.0131Red oak veneer sheets and sheets for plywood and other wood, sawn lengthwise, sliced or peeled, thickness not exceeding 6 mm, spliced or end-jointed
  • 4408.90.0137Oak, except red, veneer sheets & sheets for plywood & other wood, sawn lengthwise, sliced or peeled, thickness not over 6 mm, spliced or end-jointed
  • 4408.90.0145Walnut veneer sheets and sheets for plywood and other wood, sawn lengthwise, sliced or peeled, thickness not exceeding 6 mm, spliced or end-jointed
  • 4408.90.0151Veneer sheets and sheets for plywood and other wood, n.e.s.o.i., sawn lengthwise, sliced or peeled, thickness not exceeding 6 mm, spliced or end-jointed
  • 4408.90.0189Veneer sheets, sheets for plywood & other laminated wood, n.e.s.o.i., sawn lengthwise, sliced or peeled, thickness not over 6 mm,not spliced or end jointed
  • 4409.10.1000Wood siding, continuously shaped along any of its edges or faces, coniferous
  • 4409.10.2000Wood flooring (including strips and friezes for parquet flooring, not assembled), coniferous
  • 4409.10.3000Wood moldings, coniferous
  • 4409.10.7000Wood dowel rods, coniferous
  • 4409.10.9000Wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed, n.e.s.o.i., coniferous
  • 4409.21.0000Wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed, nonconiferous, of bamboo
  • 4409.22.0000Wood continuously shaped along any of its edges or faces, nonconiferous, of tropical wood
  • 4409.29.1100Wood siding continuously shaped along any of its edges or faces, non-tropical, nonconiferous
  • 4409.29.2600Wood flooring (including strips and friezes for parquet flooring, not assembled), not tropical, nonconiferous
  • 4409.29.4600Wood moldings,non tropical, nonconiferous
  • 4409.29.7100Wood dowel rods, nonconiferous
  • 4409.29.9600Wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed, n.e.s.o.i., nonconiferous
  • 4410.11.0010Particle board, of wood, unworked or not further worked than sanded
  • 4410.11.0020Particle board, of wook, surface-covered with melamine-impegnated paper
  • 4410.11.0030Particle board, of wood, surfaced-covered with decorative laminates of plactic
  • 4410.11.0060Particle board of wood, n.e.s.o.i.
  • 4410.12.0010Oriented strand board & waferboard of wood: unworked or not furthr worked than sanded
  • 4410.12.0020Oriented strand board & waferboard, of wood: n.e.s.o.i.
  • 4410.19.0010Board of wood, n.e.s.o.i., unworked or not further worked than sanded
  • 4410.19.0020Board of wood, n.e.s.o.i., surface-covered with melamine-impregnated paper
  • 4410.19.0030Board of wood, n.e.s.o.i., surface-covered with decorative laminates of plastic
  • 4410.19.0060Board of wood, n.e.s.o.i., whether or not agglomerated with resins or other organic binding substances, n.e.s.o.i.
  • 4410.90.0000Particle board and similar board of ligneous materials, except wood, whether or not agglomerated with resins or other organic binding substances
  • 4411.12.1000Fiberboard of wood or other ligneous materials, medium density fiberboard of a thickness not exceeding 5 mm, not mechanically worked/surface covered
  • 4411.12.8000Fiberboard of wood or other ligneous materials, medium density fiberboard of a thickness less than 5 mm, mechanically worked or surface covered
  • 4411.13.1000Fiberboard of wood or other ligneous materials, medium density fiberbd of a thickness ov 5 mm but not ov 9mm, not mechanically worked/surface covered
  • 4411.13.8000Fiberboard of wood or other ligneous materials, medium density fiberbd of a thickness ov 5 mm but nov 9mm, mechanically worked or surface covered
  • 4411.14.1000Fiberboard of wood or other ligneous materials, medium density fiberboard of a thickness exceeding 9mm, not mechanically worked or surface covered
  • 4411.14.8000Fiberboard of wood or other ligneous materials, medium density fiberbd of a thickness ov 9mm, mechanically worked or surface covered
  • 4411.92.1000Fiberboard of wood or other ligneous materials, n.e.s.o.i., of a density exceeding 0.8 g/cm3, not mechanically worked or surface covered
  • 4411.92.5000Fiberboard of wood or ligneous materials, density exceeding 0.8 g/cm3, n.e.s.o.i.
  • 4411.93.1000Fiberboard of wood or other ligneous materials, of a density over 0.5 g/cm3 but not over 0.8 g/cm3, not mechanically worked or surface covered n.e.s.o.i.
  • 4411.93.8000Fiberboard of wood or other ligneous materials, of a density over 0.5 g/cm3 but not over 0.8 g/cm3, mechanically worked or surface covered n.e.s.o.i.
  • 4411.94.1000Fiberboard of wood or other ligneous materials, of a density not over 0.5 g/cm3, not mechanically worked or surface covered
  • 4411.94.8000Fiberboard of wood or other ligneous materials, of a density not over 0.5 g/cm3, mechanically worked or surface covered
  • 4412.10.0000Plywood, veneered panels and similar laminated wood, of bamboo
  • 4412.31.0005Plywood with at least one outer ply of tropical wood specified in subheading note 1 to this chapter, solely of sheets of wood not gt 6mm in thickness
  • 4412.33.0600Plywood, face ply of birch, consisting solely of sheets of wood, each ply lt=6 mm (0.236 in) thick, not covered or surface covered with clear material
  • 4412.33.2600Plywood, face ply of walnut consisting solely of sheets of wood, each ply lt=6 mm (0.236 in) thick, not covered or surface covered with clear material
  • 4412.33.3200Plywood w at least one outer ply nonconf wood of subhead 441233, solely sheets of wood lt=6mm thck, not covered/surface covered w clear material n.e.s.o.i.
  • 4412.33.5700Plywood with at least one outer ply of nonconiferous wood of subheading 4412.33, consisting solely of sheets of wood lt=6mm thick, n.e.s.o.i.
  • 4412.34.2600Plywood, face ply span cedar consisting solely of sheets of wood, each ply lt=6 mm (0.236 in) thck, not covered or surface covered with clear material
  • 4412.34.3200Plywood with at least one outer ply other nonconiferous wood, solely sheets of wood lt=6mm thck, not covered/surface covered with clear material n.e.s.o.i.
  • 4412.34.5700Plywood with at least one outer ply of other nonconiferous wood, consisting solely of sheets of wood lt=6mm thick, n.e.s.o.i.
  • 4412.39.1000Plywood, both outer plies of softwood, at least one outer ply of parana pine, solely of sheets of wood, not/or surface covered with a clear material
  • 4412.39.3000Plywood, both outer plies of softwood, at least one outer ply of european red pine, solely wood, not/or surface covered with a clear material
  • 4412.39.4010Plywood, both outer plies of softwood, at least one outer ply of douglas fir, solely of sheets of wood, not/or surface covered with a clear material
  • 4412.39.4030Plywd 1 outer ply long leaf/short leaf/southern yellow/slash/pitch/va pine both outer plies softwd, sheets wood only not/or surface cover clear mat'l
  • 4412.39.4080Plywood with both outer plies of coniferous wood, consisting solely of wood each ply not exceeding 6mm in thickness n.e.s.o.i., not surface covered
  • 4412.39.5010Plywood with at least one outer ply of douglas fir, both outer plies of coniferous wood, consisting solely of sheets of wood not over 6mm thick, n.e.s.o.i.
  • 4412.39.5030Plywood with at least one outer ply of long leaf, short leaf, southern yellow, slash, pitch or virginia pine, both outer plies of softwood, n.e.s.o.i.
  • 4412.39.5050Plywoods with both outer plies of coniferous wood, consisting solely of sheets of wood each ply not exceeding 6 mm in thickness, n.e.s.o.i.
  • 4412.41.0000Laminated veneered lumber aka lvl, with at least one outer ply of tropical wood
  • 4412.42.0000Laminated veneered lumber aka lvl, with at least one outer ply of non-coniferous wood, n.e.s.o.i.
  • 4412.49.0000Laminated veneered lumber aka lvl, with both outer plies of coniferous wood
  • 4412.51.0000Blockboard, laminboard and battenboard with at least one outer ply of tropical wood
  • 4412.52.0000Blockboard, laminboard, and battenboard, at least one outer ply of nonconiferous wood
  • 4412.59.0000Blockboard, laminboard and battenboard with both outer plies of coniferous wood
  • 4412.91.0600Wood panels with at least one outer ply of tropical wood and containing at least one layer of particle board, n.e.s.o.i.
  • 4412.91.6500Wood panels with at least one outer ply of tropical wood, n.e.s.o.i.
  • 4412.92.0700Blockboard, laminboard, and battenboard, at least one layer of particle board
  • 4412.92.6500Blockboard, laminboard, and battenboard, n.e.s.o.i.
  • 4412.99.5800Plywood, veneered panels and similar laminated wood containing at least one layer of particle board, n.e.s.o.i.
  • 4412.99.9800Veneered panels and similar laminated wood, n.e.s.o.i.
  • 4413.00.0000Densified wood, in blocks, plates, strips or profile shapes
  • 4414.10.0000Tropical wood frames for paintings, photographs, mirrors or similar objects
  • 4414.90.0000Wooden frames for paintings, photographs, mirrors or similar objects, n.e.s.o.i.
  • 4415.10.0000Cases, boxes, crates, drums and similar packings of wood; cable-drums of wood
  • 4415.20.0000Pallets, box pallets and other load boards; pallet collars of wood
  • 4416.00.3010Casks, barrels and hogsheads, new, of wood
  • 4416.00.3020Casks, barrels and hogsheads, used, assembled (set up), of wood
  • 4416.00.3030Casks, barrels and hogsheads, used, unassembled (knocked down), of wood
  • 4416.00.6010Staves, new, of wood
  • 4416.00.6020Hoops, new, of wood
  • 4416.00.6030Tight barrelheads, new, of softwood
  • 4416.00.6040Staves, used, of wood
  • 4416.00.6050Hoops, of wood, tight barrelheads of softwood, used
  • 4416.00.9020Vats, tubs and other coopers' products and parts thereof, of wood, new, n.e.s.o.i.
  • 4416.00.9040Vats, tubs and other coopers' products and parts thereof, of wood, used, n.e.s.o.i.
  • 4417.00.0000Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees of wood
  • 4418.11.0000Windows, french-windows and their frames of tropical wood
  • 4418.19.0000Windows, french-windows and their frames, n.e.s.o.i.
  • 4418.21.0030Flush doors, of tropical wood
  • 4418.21.0060Doors and their frames and thresholds, of tropical wood, n.e.s.o.i. (excluding flush doors)
  • 4418.29.0030Flush doors, of wood, n.e.s.o.i.
  • 4418.29.0060Doors and their frames and thresholds, of wood, n.e.s.o.i. (excluding flush doors)
  • 4418.30.0100Posts and beams, of wood
  • 4418.40.0000Formwork (shuttering) for concrete constructional work, of wood
  • 4418.50.0000Shingles and shakes of wood
  • 4418.73.0000Assembled flooring panels, of bamboo, for mosaic floors
  • 4418.74.0000Assembled flooring panels, of wood, for mosaic floors
  • 4418.75.0000Other assembled flooring panels, of wood, multilayer, not for mosaic floors
  • 4418.79.0002Assembled flooring panels, of wood, n.e.s.o.i.
  • 4418.81.0000Glue-laminated timber (glulam)
  • 4418.82.0000Cross-laminated timber (clt or x-lam)
  • 4418.83.0000I beams of timber
  • 4418.89.0000Engineered structural timber products, n.e.s.o.i.
  • 4418.91.0100Builders' joinery and carpentry of bamboo, n.e.s.o.i.
  • 4418.92.0000Cellular wood panels
  • 4418.99.0000Builders' joinery and carpentry of wood, including cellular wood panels, n.e.s.o.i.
  • 4419.11.0000Breadboards, chopping boards and similar boards, of bamboo
  • 4419.12.0000Chopsticks, of bamboo
  • 4419.19.0000Tableware and kitchenware, of bamboo
  • 4419.20.0000Tableware and kitchenware of tropical wood
  • 4419.90.0100Tableware and kitchenware, of wood, n.e.s.o.i.
  • 4420.11.0000Statuettes and other ornaments of tropical wood
  • 4420.19.0000Statuettes and other ornaments of wood, n.e.s.o.i.
  • 4420.90.7000Jewelry boxes, silverware chests, cigar and cigarette boxes, microscope cases, tool or utensil cases and similar boxes, cases and chests, of wood
  • 4420.90.8000Wood marquetry and inlaid wood; caskets for jewelry, cutlery and similar articles, of wood, wooden articles of furniture not in chapter 94, n.e.s.o.i.
  • 4421.10.0000Clothes hangers, of wood
  • 4421.20.0000Coffins of wood
  • 4421.91.0100Articles of bamboo, n.e.s.o.i.
  • 4421.99.2500Wood dowel pins
  • 4421.99.4500Wood blinds, shutters, screens and shades, all the foregoing, with or without their hardware
  • 4421.99.6500Toothpicks, skewers, candy sticks, ice cream sticks, tongue depressors, drink mixers and similar small wares of wood
  • 4421.99.7000Pickets, palings, posts and rails, sawn; assembled fence sections, wood
  • 4421.99.9100Articles of wood, n.e.s.o.i.

Source: U.S. Census Bureau, Schedule B. Fromerica is an independent company, not affiliated with the Census Bureau; confirm your classification with the official Schedule B search.

Selling abroad from the U.S.?

List your company on Fromerica so buyers in these markets can find you and request quotes.

List your company → Export guides by country