Schedule B chapter 72: Iron and steel
216 ten-digit Schedule B numbers are listed in chapter 72. Open a code to see its unit of quantity, the international HS code your buyer will use, when EEI is required and the main U.S. export markets.
- 7201.10.0000Nonalloy pig iron containing 0.5 percent or less phosphorus
- 7201.20.0000Nonalloy pig iron containing more than 0.5 percent phosphorus
- 7201.50.3000Alloy pig iron
- 7201.50.6000Spiegeleisen
- 7202.11.0000Ferromanganese containing by weight more than 2 percent of carbon
- 7202.19.0000Ferromanganese, containing by weight 2 percent or less of carbon
- 7202.21.0000Ferrosilicon containing by weight more than 55 percent silicon
- 7202.29.0000Ferrosilicon, containing by weight 55 percent or less silicon
- 7202.30.0000Ferrosilicon manganese
- 7202.41.0000Ferrochromium over 4 percent carbon
- 7202.49.0000Ferrochromium, 4 percent or less carbon
- 7202.50.0000Ferrosilicon chromium
- 7202.60.0000Ferronickel
- 7202.70.0000Ferromolybdenum
- 7202.80.0000Ferrotungsten and ferrosilicon tungsten
- 7202.91.0000Ferrotitanium and ferrosilicon titanium
- 7202.92.0000Ferrovanadium
- 7202.93.0000Ferroniobium
- 7202.99.1000Ferrozirconium
- 7202.99.5020Ferrophosphorus
- 7202.99.5040Ferroalloys n.e.s.o.i.
- 7203.10.0000Ferrous products obtained by direct reduction of iron ore
- 7203.90.0000Spongy ferrous products minimum purity by weight 99.94 percent iron, n.e.s.o.i.
- 7204.10.0000Cast iron waste and scrap
- 7204.21.0000Stainless steel waste and scrap
- 7204.29.0000Alloy steel waste and scrap not stainless
- 7204.30.0000Tinned iron or steel waste and scrap
- 7204.41.0020No 1 bundles steel scrap
- 7204.41.0040No 2 bundles steel scrap
- 7204.41.0060Borings, shovelings and turnings steel scrap
- 7204.41.0080Shavings, chips, milling waste, sawdust, filings, trimmings, stampings steel scrap
- 7204.49.0020No 1 heavy melting steel scrap
- 7204.49.0040No 2 heavy melting steel scrap
- 7204.49.0060Cut plate and structural steel scrap
- 7204.49.0070Shredded steel scrap
- 7204.49.0080Ferrous scrap, n.e.s.o.i.
- 7204.50.0000Remelting scrap ingots, ferrous scrap
- 7205.10.0000Granules, iron or steel
- 7205.21.0000Alloy steel powders
- 7205.29.0000Powders, iron or nonalloy steel
- 7206.10.0000Iron and nonalloy steel ingots
- 7206.90.0000Iron and nonalloy steel, primary forms not ingots
- 7207.11.0000Semifinished products of iron or nonalloy steel under 0.25 percent carbon rectangular or square cross-section width less than twice the thickness
- 7207.12.0000Semifinished products of iron or nonalloy steel less than 0.25 percent carbon, rectangular cross section, width at least twice the thickness
- 7207.19.0000Semifinished products of iron or nonalloy steel less than 0.25 percent carbon, cross section other than rectangular or square
- 7207.20.0000Semifinished products of iron or nonalloy steel, 0.25 percent or more of carbon
- 7208.10.1500Flat-rolled iron or nonalloy steel coils, 600 mm or more wide, hot-rolled, not clad, plated or coated, pickled, with patterns in relief
- 7208.10.2500Flat-rolled iron or nonalloy steel coils 600 mm or more wide, hot-rolled, not clad, plated or coated, not pickled, patterns in relief
- 7208.25.3000Flat-rolled high-strengh iron or nonalloy steel coils, 600 mm or more wide, hot-rolled, not clad, plated or coated, pickled, 4.75 mm or more thick
- 7208.25.6000Flat-rolled iron or nonalloy steel coils, nt hi-str, 600 mm or more wide, hot-rolled, not clad, plated or coated, pickled, 4.75 mm or more thick
- 7208.26.0030Flat-rolled high-strength steel of a width gt=600 mm, in coils, not further worked than hot-rolled, pickled, of a thickness gt=3 mm but lt= 4.75 mm
- 7208.26.0060Flat-rolled iron or nonalloy steel coils,nt hi-str, 600 mm or more wide,hot-rolled,not clad,plated or coated,pickled,gt=3 mm but lt= 4.75mm thick
- 7208.27.0030Flat-rolled high-strength steel of a width gt 600 mm, in coils, not further worked than hot-rolled, pickled, of a thickness lt 3 mm
- 7208.27.0060Flat-rolled iron or nonalloy steel coils, except high-strength, 600mm or more wide, hot-rolled, not clad, plated or coated, pickled, lt 3 mm thick
- 7208.36.0030Flat-rolled high-strength iron or nonalloy steel coils, 600 mm or more wide, hot-rolled, not clad, plated or coated, not pickled, gt 10 mm thick
- 7208.36.0060Flat-rolled iron or nonalloy steel coils, exc high-strength, 600mm or more wide, hot-rolled, not clad, plated or coated, not pickled, gt 10 mm thick
- 7208.37.0030Flat-rolled high-strength iron or nonalloy steel coils,600mm or more wide,hot-rolled,not clad,plated or coated,not pickled, gt 4.75mm to lt 10mm thick
- 7208.37.0060Flat-rolled iron or nonalloy steel coils,ex hi-str,600mm or more wide,hot-rolled,not clad, plated or coated,not pickled,gt=4.75mm to lt 10 mm thk
- 7208.38.0015Flat-rolled high-strength steel of a width >600 mm, in coils, not further worked than hot-rolled, of a thickness >3 mm but <4.75 mm
- 7208.38.0050Other flat-rolled iron or nonalloy steel coils, 600 mm or more wide, hot-rolled, not clad, plated or coated or pickled, 3mm to under 4.75 mm thick
- 7208.39.0015Flat-rolled high-strength iron or nonalloy steel coils, 600mm or more wide, hot-rolled, not clad, plated or coated, not pickled, <3 mm thick
- 7208.39.0050Flat-rolled other iron or nonalloy steel coils, 60omm or more wide, hot-rolled, not clad, plated or coated, less than 3 mm thick
- 7208.40.0000Flat-rolled /iron or nonalloy steel, 600 mm or more wide, hot-rolled, not clad, plated or coils, patterns in relief
- 7208.51.0030Universal mill plate, iron or nonalloy steel, not coils, 600 mm or more wide, hot-rolled, not clad, plated, coated, gt 10 mm thick
- 7208.51.0050Flat-rolled iron or nonalloy steel, not universal mill plate, 600 mm or more wide, hot-rolled, not clad, plated,coated or coils, gt 10mm thick,n.e.s.o.i.
- 7208.52.0000Flat-rolled iron or nonalloy steel,not coils,600mm or more wide,hot-rolled,not clad,plated,coated,gt=4.75mm to lt 10mm thick
- 7208.53.0000Flat-rolled iron or nonalloy steel, not coils, 600 mm or more wide, hot-rolled, not clad, plated, coated,gt= 3 mm to lt 4.75 mm thick
- 7208.54.0000Flat-rolled iron or nonalloy steel, not coils, 600 mm or more wide, hot-rolled, not clad, plated, coated, less than 3 mm thick
- 7208.90.0000Flat-rolled iron or nonalloy steel coils or not, 600mm or more wide, hot-rolled, not clad, plated or coated, n.e.s.o.i.
- 7209.15.0000Flat-rolled iron or nonalloy steel coils, 600mm or more wide, cold-rolled (cold-reduced), 3mm (0.118 inch) or more thick, not clad, plated or coated
- 7209.16.0010Flat-rolled hi-strength steel, 600 mm wide or more, cold-rolled, not clad, etc, in coils, thickness gt 1mm, less than 3mm
- 7209.16.0090Flat-rolled iron or nonalloy steel coils 600mm or more wide cold-rolled not clad,plated or coated,gt 1mm but less than 3mm thick,ex hi-strength
- 7209.17.0010Flat-rolled high strength steel coils, 600 mm or more wide, cold-rolled, not clad, plated or coated, gt 0.5 mm but not gt 1 mm thick
- 7209.17.0090Flat-rolled iron or nonalloy steel coils 600mm or more wide cold-rolled not clad,plated or coated,0.5mm or more but not gt 1mm thick,ex hi-strength
- 7209.18.1500Flat-rolled high-strength steel coils, 600 mm or more wide, cold-rolled, not clad, plated or coated, less than 0.5 mm thick
- 7209.18.2500Flat-rolled iron or nonalloy steel coils, 600 mm or more wide, cold-rolled, not clad, plated or coated, less than 0.361 mm thick (blackplate)
- 7209.18.6000Flat-rolled iron or nonalloy steel coils, 600mm or more wide, cold-rolled, not clad, plated or coated, n.e.s.o.i.
- 7209.25.0000Flat-rolled iron or nonalloy steel, not coils, 600 mm or more wide, cold-rolled (cold-reduced), 3mm or more thick, not clad, plated or coated
- 7209.26.0000Flat-rolled iron or nonalloy steel, not coils, 600mm or more wide, cold-rolled, more than 1m but less than 3mm thick,not clad plated or coated
- 7209.27.0000Flat-rolled iron or nonalloy steel,not coils,600 mm or more wide,cold-rolled (cold-reduced),gt 0.5mm but less than 1mm thick,not clad plated or coatd
- 7209.28.0000Flat-rolled iron or nonalloy steel, not in coils, 600mm or more wide, cold-rolled (cold-reduced), less than 0.5mm thick, not clad, plated or coated
- 7209.90.0000Flat-rolled iron or nonalloy steel, coils or not, 600mm or more wide, cold-rolled, not clad, plated or coated, n.e.s.o.i.
- 7210.11.0000Flat-rolled iron or nonalloy steel, 600mm or more wide, plated or coated with tin, 0.5mm or more thick
- 7210.12.0000Flat-rolled iron or nonalloy steel, 600mm or more wide, coated or plated with tin, less than 0.5mm thick
- 7210.20.0000Flat-rolled iron or nonalloy steel, 600mm or more wide, coated or plated with lead (terneplate)
- 7210.30.0030Flat-rolled high-strength iron or non-alloy steel, 600mm or more wide, electrolytically plated or coated with zinc
- 7210.30.0060Flat-rolled iron or nonalloy steel,600mm or more wide,electrolytically plated or coated with zinc,other than high-strength
- 7210.41.0000Flat-rolled iron or nonalloy steel,600mm or more wide,coated or plated with zinc, not electrolytic, corrugated, not high-strength
- 7210.49.0030Flat-rolled high-strength iron or nonalloy steel, 600 mm or more wide, plated or coated with zinc (not electrolytically), n.e.s.o.i.
- 7210.49.0090Flat-rolled iron or nonalloy steel, 600 mm or more wide, plated or coated with zinc (not electrolytically), n.e.s.o.i.
- 7210.50.0000Flat-rolled iron or nonalloy steel, 600mm or more wide, plated or coated with chromium oxides or chromium and chromium oxides
- 7210.61.0000Flat-rolled iron or nonalloy steel, 600mm or more wide, plated or coated with aluminum-zinc alloys
- 7210.69.0000Flat-rolled iron or nonalloy steel, 600mm or more wide, plated or coated with aluminum other than aluminum-zinc alloys
- 7210.70.0000Flat-rolled iron or nonalloy steel, 600mm wide or more, painted, varnished or plastic coated
- 7210.90.1000Flat-rolled iron or nonalloy steel, 600mm or more wide, clad, n.e.s.o.i.
- 7210.90.5000Flat-rolled products of iron or nonalloy steel, 600mm wide or more, clad, plated or coated, n.e.s.o.i.
- 7211.13.0000Flat-rolled iron or nonalloy steel, less than 600mm wide, hot-rolled, not clad, plated or coated, universal mill plate
- 7211.14.0000Flat-rolled iron or nonalloy steel under 600mm wide, not clad, coated or plated, hot-rolled, of a thickness of 4.75mm or more
- 7211.19.3050Flat-rolled of high-strength steel less than 600mm wide, not clad, plated or coated, not further worked than hot-rolled
- 7211.19.7050Flat-rolled iron or nonalloy steel, less than 600mm wide, hot-rolled, not clad, plated or coated, n.e.s.o.i.
- 7211.23.5000Flat-rolled high-strength steel, of a width lt 600 mm, not clad, plated or coated, not further worked than cold-rolled, cont by weight lt 0.25% carbon
- 7211.23.9000Flat-rolled iron or nonalloy steel, under 600 mm wide, not clad, plated or coated; cold-rolled, not high strength, under .25 pct carbon
- 7211.29.3050Flat-rolled iron or nonalloy steel, under 600 mm wide, not clad, plated, or coated, not futher worked than cold-rolled, 0.25 percent or more of carbon
- 7211.90.0000Flat-rolled iron or nonalloy steel, less than 600mm wide, not clad, plated or coated, n.e.s.o.i.
- 7212.10.0000Flat-rolled iron or nonalloy steel, less than 600mm wide, plated or coated with tin
- 7212.20.0000Flat-rolled iron or nonalloy steel, less than 600mm wide, electrolytically plated or coated with zinc
- 7212.30.0000Flat-rolled iron or nonalloy steel, less than 600mm wide, plated or coated with zinc (not electrolyticaly)
- 7212.40.0000Flat-rolled iron or nonalloy steel, under 600mm wide, painted, varnished or coated with plastics
- 7212.50.0000Flat-rolled iron or nonalloy steel, less than 600mm wide, otherwise plated or coated, n.e.s.o.i.
- 7212.60.0000Flat-rolled iron or nonalloy steel, less than 600mm wide, clad, n.e.s.o.i.
- 7213.10.0000Concrete reinforcing bars and rods of iron or nonalloy steel, in irregularly wound coils, hot-rolled
- 7213.20.0000Bars and rods of free-cutting iron or nonalloy steel, hot-rolled, in irregularly wound coils
- 7213.91.3000Bars & rods of iron or nonalloy steel, circular cross-section lt 14mmdiameter, not tempered/treated/partly manufactured, irregular coils, hot-rolled
- 7213.91.4500Bars & rods, iron/nonalloy steel, irregularly wound coil, circular cross section lt 14mm diameter, 0.6% or more carbon, not concrete reinforced, n.e.s.o.i.
- 7213.91.6000Bars/rods,iron/nonalloy steel,hot-rolled,irregularly wound coils,circular cross section lt 14mm diameter,lt 0.6% carbon,not concrete reinforced, n.e.s.o.i.
- 7213.99.0000Bars and rods iron or nonalloy steel, hot-rolled in irregularly wound coils of circular cross-section 14mm or more diameter, n.e.s.o.i.
- 7214.10.0000Bars and rods of iron or nonalloy steel, not further worked than forged, including those twisted after rolling
- 7214.20.0000Concrete reinforcing bars and rods, iron or nonalloy steel, not further worked than hot-rolled or hot-drawn, including those twisted after rolling
- 7214.30.0000Bars and rods of free-cutting iron or nonalloy steel, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
- 7214.91.0015Bars and rods of iron or nonalloy steel, hot-rolled, hot-drawn, of rectangular (not square) cross-section, containing lt 0.25 percent of carbon, n.e.s.o.i.
- 7214.91.0060Bars and rods of iron or nonalloy steel,hot-rolled,hot-drawn of rectangular (not square) cross-section, containing by weight 0.25-0.6% carbon, n.e.s.o.i.
- 7214.91.0090Bars and rods of iron or nonalloy steel, hot-rolled, hot-drawn, of rectangular (not square) cross-section, containing by weight gt= 0.6% carbon,n.e.s.o.i.
- 7214.99.0010Bars and rods of iron or nonalloy steel, hot-rolled, hot-drawn, including those twisted after rolling, containing by weight lt 0.25% carbon, n.e.s.o.i.
- 7214.99.0025Bars and rods of iron or nonalloy steel, hot-rolled,hot-drawn, including those twisted after rolling, containing by weight 0.25-0.6% carbon, n.e.s.o.i.
- 7214.99.0035Bars and rods of iron or nonalloy steel, hot-rolled,hot-drawn, including those twisted after rolling, containing by weight ge 0.6% carbon, n.e.s.o.i.
- 7215.10.0000Bars and rods, of iron or nonalloy free-cutting steel, not further worked than cold-formed or cold-finished
- 7215.50.0015Bars and rods, of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing by weight less than 0.25% of carbon, n.e.s.o.i.
- 7215.50.0060Bars and rods, of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing by weight 0.25-0.6% carbon, n.e.s.o.i.
- 7215.50.0090Bars and rods, of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing by weight 0.6 percent or more carbon,n.e.s.o.i.
- 7215.90.0000Bars and rods, of iron or nonalloy steel, n.e.s.o.i.
- 7216.10.0000Angles, shapes, and u, i, or h sections of iron or nonalloy steel not further worked than hot-rolled, hot-drawn or extruded, less than 80mm high
- 7216.21.0000Angles, shapes & l sections, of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn or extruded, less than 80mm high
- 7216.22.0000Angles, shapes, and t sections, of iron or nonalloy steel, not further worked than hot-rolled, hot drawn or extruded, less than 80mm high
- 7216.31.0000Angles, shapes and u sections, of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn or extruded, 80mm or more high
- 7216.32.0000Angles, shapes and i sections, of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn, or extruded, 80mm or more high,standard beams
- 7216.33.0000Angles, shapes and h sections of iron or nonalloy steel not further worked than hot-rolleed, hot-drawn, or extruded, 80mm or more high
- 7216.40.0000Angles, shapes and l or t sections of iron or nonalloy steel not further worked than hot-rolled, hot-drawn or extruded, 80mm or high
- 7216.50.0000Angles, shapes, and sections, of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn, or extruded, n.e.s.o.i.
- 7216.61.0000Angles, shapes and sections, iron or nonalloy steel, not further worked than cold-formed or cold-finished, obtained from flat-rolled products
- 7216.69.0000Angles, shapes and sections, iron or nonalloy steel, not further worked than cold-formed or cold-finished, not obtained from flat-rolled products
- 7216.91.0000Angles, shapes and sections, iron or nonalloy steel, cold-formed or cold-finished, from flat-rolled products, n.e.s.o.i.
- 7216.99.0000Angles, shapes and sections, iron or nonalloy steel, n.e.s.o.i.
- 7217.10.1510Wire of iron or nonalloy steel less than 0.25 percent carbon, not plated or coated, whether or not polished
- 7217.10.2510Wire of iron or nonalloy steel 0.25 to under 0.6 percent carbon, not plated or coated, whether or not polished
- 7217.10.7510Wire of iron or nonalloy steel 0.6 percent or more carbon, not plated or coated, whether or not polished
- 7217.20.1010Wire of iron or nonalloy steel less than 0.25 percent carbon, plated or coated with zinc
- 7217.20.5010Wire of iron or nonalloy steel 0.25 to under 0.6 percent carbon, plated or coated with zinc
- 7217.20.9010Wire of iron or nonalloy steel 0.6 percent or more carbon, plated or coated with zinc
- 7217.30.1010Wire of iron or nonalloy steel less than 0.25 percent carbon, plated or coated with base metals other than zinc
- 7217.30.5010Wire of iron or nonalloy steel 0.25 to under 0.6 percent carbon, plated or coated with base metals other than zinc
- 7217.30.9010Wire of iron or nonalloy steel 0.6 percent or more carbon, plated or coated with base metals other than zinc
- 7217.90.0000Wire of iron or nonalloy steel less than 0.25 percent carbon, n.e.s.o.i.
- 7218.10.0000Stainless steel ingots and other primary forms
- 7218.91.0000Semifinished products of stainless steel, rectangular (other than square) cross-section
- 7218.99.0000Other semifinished products of stainless steel
- 7219.11.0000Flat-rolled products of stainless steel 600mm wide or more, not further worked than hot rolled, in coils, of a thickness exceeding 10mm
- 7219.12.0000Flat-rolled products of stainless steel 600mm wide or more, not further worked than hot rolled, in coils, 4.75mm or more but less than 10mm thickess
- 7219.13.0000Flat-rolled stainless steel products 600mm wide or more, hot rolled, in coils, of a thickness 3mm or more but less than 4.75mm
- 7219.14.0000Flat-rolled products of stainless steel 600mm wide or more, not further worked than hot rolled in coils, of a thickness less than 3mm
- 7219.21.0000Flat-rolled stainless steel 600mm wide or more hot-rolled not coiled over 10mm thick
- 7219.22.0000Flat-rolled stainless steel 600mm or more wide hot-rolled, not coiled of a thickness 4.75mm or more but not exceeding 10mm
- 7219.23.0000Flat-rolled stainless steel 600mm or more wide hot-rolled, not coiled of a thickness of 3mm or more but less than 4.75mm
- 7219.24.0000Flat-rolled stainless steel 600mm or more wide hot-rolled not coiled less than 3mm thick
- 7219.31.0000Flat-rolled stainless steel 600mm or more wide, cold-rolled, 4.75mm or more thick
- 7219.32.0000Flat-rolled stainless steel 600mm or more wide, cold-rolled, of a thickness or 3mm or more but less than 4.75mm
- 7219.33.0000Flat-rolled stainless steel 600mm or more wide, cold-rolled, exceeding 1mm, but less than 3mm thick
- 7219.34.0000Flat-rolled stainless steel 600mm or more wide, cold-rolled, of a thickness of 0.5mm or more but exceeding 1mm
- 7219.35.0000Flat-rolled stainless steel 600mm or more wide, cold-rolled, less than 0.5 mm thick
- 7219.90.0000Flat-rolled stainless steel 600mm or more wide, n.e.s.o.i.
- 7220.11.0000Flat-rolled, stainless steel, less than 600mm wide, hot rolled, 4.75mm or more thick
- 7220.12.0000Flat-rolled stainless steel less than 600mm wide, hot rolled, less than 4.75 mm thick
- 7220.20.0000Flat-rolled stainless steel less than 600mm wide, cold-rolled
- 7220.90.0000Flat-rolled stainless steel, less than 600mm wide,n.e.s.o.i.
- 7221.00.0000Bars and rods, stainless steel, hot-rolled, in irregularly wound coils
- 7222.11.0000Other bars and rods of stainless steel, hot-rolled, circular cross-section
- 7222.19.0000Other bars and rods of stainless steel, hot-rolled, other than circular cross-section
- 7222.20.0000Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished
- 7222.30.0000Bars and rods, stainless steel, n.e.s.o.i.
- 7222.40.0000Angles, shapes, and sections of stainless steel
- 7223.00.0000Wire of stainless steel
- 7224.10.0000Other alloy steel in ingots and other primary forms
- 7224.90.0000Semifinished products of other alloy steel
- 7225.11.0000Flat-rolled products of silicon electrical steel, of a width of 600mm or more, grain-oriented
- 7225.19.0000Flat-rolled products of silicon electrical steel, of a width of 600mm or more, not grain oriented
- 7225.30.0002Flat-rolled products of other alloy steel, 600mm or more wide, not further worked than hot-rolled in coils, n.e.s.o.i.
- 7225.40.0002Flat-rolled, other alloy steel, 600mm or more wide, not further worked than hot-rolled, not in coils, n.e.s.o.i.
- 7225.50.0002Flat-rolled, other alloy steel, 600mm or more wide, not further worked than cold-rolled, n.e.s.o.i.
- 7225.91.0002Flat-rolled products of other alloy steel, 600 mm or more wide, electrolytically plated or coated with zinc, n.e.s.o.i.
- 7225.92.0002Flat-rolled products of other alloy steel, 600 mm or more wide, plated or coated with zinc, not electrolytically, n.e.s.o.i.
- 7225.99.0002Flat-rolled, other alloy steel, 600 mm or more wide, n.e.s.o.i.
- 7226.11.0000Flat-rolled products of silicon electrical steel less than 600mm wide, grain-oriented
- 7226.19.0000Flat-rolled products of silicon electrical steel less than 600mm wide, not grain-oriented
- 7226.20.0000Flat-rolled products of high-speed steel, less than 600mm wide
- 7226.91.0000Flat-rolled products, of other alloy steel, less than 600mm wide, not further worked than hot-rolled
- 7226.92.2000Flat-rolled products of tool steel, not high-speed, less than 600mm wide, not further worked than cold-rolled
- 7226.92.4000Flat-rolled, other alloy steel, not tool steel, less than 600mm wide, not further worked than cold-rolled
- 7226.99.0110Flat-rolled products of other alloy steel, less than 600mm wide, electrolytically plated or coated with zinc
- 7226.99.0130Flat-rolled products, of other alloy steel, otherwise plated or coated with zinc, of a width less than 600 mm, n.e.s.o.i.
- 7226.99.0180Flat-rolled products of other alloy steel, of a width less than 600 mm wide, n.e.s.o.i.
- 7227.10.0000Bars and rods of high-speed steel, in irregular wound coils, hot-rolled
- 7227.20.0000Bars and rods of silico-manganese steel in irregular wound coils, hot-rolled
- 7227.90.0000Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils, n.e.s.o.i.
- 7228.10.0000Other bars and rods of high-speed steel
- 7228.20.0000Other bars and rods of silico-manganese steel
- 7228.30.5000Other bars and rods, of tool steel not high-speed, not further worked than hot-rolled, hot-drawn, or extruded
- 7228.30.8000Other bars and rods of other alloy steel, not tool steel, not further worked than hot-rolled, hot-drawn, or extruded
- 7228.40.0000Bars and rods of other alloy steel, not further worked than forged
- 7228.50.1000Other bars a rods of tool steel not high-speed, not further worked than cold-formed or cold-finished
- 7228.50.5000Other bars and rods of other alloy steel not tool steel, not further worked than cold-formed or cold-finished
- 7228.60.1000Other bars and rods of tool steel not high-speed steel, n.e.s.o.i.
- 7228.60.5000Other bars and rods of other alloy steel, not tool steel, n.e.s.o.i.
- 7228.70.0000Angles, shapes and sections of other alloy steel
- 7228.80.0000Hollow drill bars and rods, alloy or nonalloy steel, n.e.s.o.i.
- 7229.20.0000Wire of silico-manganese steel
- 7229.90.0500Wire of high-speed steel
- 7229.90.8000Wire of other alloy steel, n.e.s.o.i.
Source: U.S. Census Bureau, Schedule B. Fromerica is an independent company, not affiliated with the Census Bureau; confirm your classification with the official Schedule B search.
Selling abroad from the U.S.?
List your company on Fromerica so buyers in these markets can find you and request quotes.