Heading 4412: Plywood, veneered panels and similar laminated wood
Every line of heading 4412 in the U.S. Harmonized Tariff Schedule, with its general (column 1) duty rate. Open a code for the landed cost calculator, trade agreement rates and email alerts if the rate changes.
Plywood, veneered panels and similar laminated wood
Chapter 44: Wood and articles of wood; wood charcoal. Schedule checked on November 8, 2026.
Not always the total: additional chapter 99 duties (such as Section 232 or Section 301), antidumping or countervailing duties may apply depending on the country of origin. See recent chapter 99 changes →
Tariff lines
| HTS code | Official description | General rate |
|---|---|---|
| 4412.10 | Of bamboo: | |
| 4412.10.05.00 | Plywood | 8% |
| 4412.10.90.00 | Other | Free |
| 4412.31 | With at least one outer ply of tropical wood: | |
| 4412.31.06 | With a face ply of birch (Betula spp.) | Free |
| 4412.31.06.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | |
| 4412.31.06.40 | Not surface covered | |
| 4412.31.06.60 | Other | |
| 4412.31.26 | With a face ply of Spanish cedar (Cedrela spp.) or walnut (Juglans spp) | 8% |
| 4412.31.26.10 | With a face ply of Spanish cedar (Cedrela spp.) | |
| 4412.31.26.20 | With a face ply of walnut (Juglans spp.) | |
| 4412.31.42.00 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | 8% |
| 4412.31.45.00 | Panels not exceeding 3.6 mm in thickness and exceeding 1.2 m in width and 2.2 m in length | 8% |
| 4412.31.48 | Other | 8% |
| 4412.31.48.50 | Panels not exceeding 3.6 mm in thickness and not exceeding 1.2 m in width and 2.2 m in length | |
| 4412.31.48.60 | Dark Red Meranti, Light Red Meranti or White Lauan (Luan) (Shorea spp.) | |
| 4412.31.48.63 | Limba (Terminalia spp.), also known as Terminalia and Nargusta | |
| 4412.31.48.66 | Virola (Virola spp.) | |
| 4412.31.48.69 | Other | |
| 4412.31.48.75 | Wood flooring | |
| 4412.31.48.80 | Other | |
| 4412.31.52 | Other | 8% |
| 4412.31.52.25 | Wood flooring | |
| 4412.31.52.35 | With a face ply of sen (Kalopanax spp.) | |
| 4412.31.52.55 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | |
| 4412.31.52.60 | Albizia (Albizia spp.), also known as Falcata, Batai and Suar wood | |
| 4412.31.52.62 | Bintangor (Calophyllum spp.) | |
| 4412.31.52.64 | Mersawa (Anisoptera spp.) | |
| 4412.31.52.66 | Parica (Schizolobium spp.), also known as Pinho Cuiabano, Firetree and Guapuruvu | |
| 4412.31.52.68 | Pencil cedar, Nyatoh (Palaquium spp.) | |
| 4412.31.52.70 | Other | |
| 4412.31.52.75 | Other | |
| 4412.31.61.00 | With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose | 8% |
| 4412.31.92.00 | Other | 8% |
| 4412.33 | Other, with at least one outer ply of nonconiferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.), chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.), oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.), robinia (Robinia spp.), tulipwood (Liriodendron spp.) or walnut (Juglans spp.): | |
| 4412.33.06 | With a face ply of birch (Betula spp.) | Free |
| 4412.33.06.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | |
| 4412.33.06.40 | Not surface covered | |
| 4412.33.06.65 | Wood flooring | |
| 4412.33.06.70 | Other | |
| 4412.33.26 | With a face ply of walnut (Juglans spp.) | 5.1% |
| 4412.33.26.25 | Wood flooring | |
| 4412.33.26.30 | Other | |
| 4412.33.32 | Other | 8% |
| 4412.33.32.25 | Wood flooring | |
| 4412.33.32.35 | With a face ply of sen (Kalopanax spp.) | |
| 4412.33.32.55 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | |
| 4412.33.32.65 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | |
| 4412.33.32.75 | Not surface covered | |
| 4412.33.32.85 | Other | |
| 4412.33.57.00 | Other | 8% |
| 4412.34 | Other, with at least one outer ply of nonconiferous wood not specified under subheading 4412.33: | |
| 4412.34.26.00 | With a face ply of Spanish cedar (Cedrela spp.) | 5.1% |
| 4412.34.32 | Other | 8% |
| 4412.34.32.25 | Wood flooring | |
| 4412.34.32.35 | With a face ply of sen (Kalopanax spp.) | |
| 4412.34.32.55 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | |
| 4412.34.32.65 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | |
| 4412.34.32.75 | Not surface covered | |
| 4412.34.32.85 | Other | |
| 4412.34.57.00 | Other | 8% |
| 4412.39 | Other, with both outer plies of coniferous wood: | |
| 4412.39.10.00 | With a face ply of Parana pine (Araucaria angustifolia) | Free |
| 4412.39.30.00 | With a face ply of European red pine (Pinus silvestris) | 3.4% |
| 4412.39.40 | Other | 8% |
| 4412.39.40.11 | Rough, or touch sanded for sizing purposes, but not further processed | |
| 4412.39.40.12 | Fully sanded on at least one face, but not further processed | |
| 4412.39.40.19 | Other | |
| 4412.39.40.31 | Rough, or touch sanded for sizing purposes, but not further processed | |
| 4412.39.40.32 | Fully sanded on at least one face, but not further processed | |
| 4412.39.40.39 | Other | |
| 4412.39.40.51 | Rough, or touch sanded for sizing purposes, but not further processed | |
| 4412.39.40.52 | Fully sanded on at least one face, but not further processed | |
| 4412.39.40.59 | Other | |
| 4412.39.40.61 | Rough, or touch sanded for sizing purposes, but not further processed | |
| 4412.39.40.62 | Fully sanded on at least one face, but not further processed | |
| 4412.39.40.69 | Other | |
| 4412.39.50 | Other | 5.1% |
| 4412.39.50.10 | With at least one outer ply of Douglas fir (Pseudotsuga menziesii) | |
| 4412.39.50.30 | With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine) (Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana) | |
| 4412.39.50.50 | Other | |
| 4412.41.00.00 | With at least one outer ply of tropical wood | Free |
| 4412.42.00.00 | Other, with at least one outer ply of nonconiferous wood | Free |
| 4412.49.00.00 | Other, with both outer plies of coniferous wood | Free |
| 4412.51 | With at least one outer ply of tropical wood: | |
| 4412.51.10 | With a face ply of birch (Betula spp.) | Free |
| 4412.51.10.30 | Not surface covered | |
| 4412.51.10.50 | Other | |
| 4412.51.31 | Other | 8% |
| 4412.51.31.05 | Wood flooring | |
| 4412.51.31.11 | With a face ply of Spanish cedar (Cedrela spp.) | |
| 4412.51.31.21 | With a face ply of walnut (Juglans spp.) | |
| 4412.51.31.41 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | |
| 4412.51.31.61 | Not surface covered | |
| 4412.51.31.75 | Other | |
| 4412.51.41.00 | Other | 8% |
| 4412.51.51.00 | Other | Free |
| 4412.52 | Other, with at least one outer ply of nonconiferous wood: | |
| 4412.52.10 | With a face ply of birch (Betula spp.) | Free |
| 4412.52.10.30 | Not surface covered | |
| 4412.52.10.50 | Other | |
| 4412.52.31 | Other | 8% |
| 4412.52.31.05 | Wood flooring | |
| 4412.52.31.21 | With a face ply of walnut (Juglans spp.) | |
| 4412.52.31.61 | Not surface covered | |
| 4412.52.31.75 | Other | |
| 4412.52.41.00 | Other | 8% |
| 4412.52.51.00 | Other | Free |
| 4412.59 | Other, with both outer plies of coniferous wood: | |
| 4412.59.60.00 | With a face ply of Parana pine (Araucaria angustifolia) | Free |
| 4412.59.70.00 | With a face ply of European red pine (Pinus silvestris) | 3.4% |
| 4412.59.80.00 | Other | 8% |
| 4412.59.90.00 | Other | 5.1% |
| 4412.59.95.00 | Other | Free |
| 4412.91 | With at least one outer ply of tropical wood: | |
| 4412.91.06.00 | Containing at least one layer of particle board | Free |
| 4412.91.10 | With a face ply of birch (Betula spp.) | Free |
| 4412.91.10.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | |
| 4412.91.10.30 | Not surface covered | |
| 4412.91.10.40 | Other | |
| 4412.91.31 | Other | 8% |
| 4412.91.31.10 | With a face ply of Spanish cedar (Cedrela spp.) | |
| 4412.91.31.20 | With a face ply of walnut (Juglans spp.) | |
| 4412.91.31.30 | With a face ply of sen (Kalopanax spp.) | |
| 4412.91.31.40 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | |
| 4412.91.31.50 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length | |
| 4412.91.31.60 | Other, not surface covered | |
| 4412.91.31.70 | Other | |
| 4412.91.41.00 | Other | 8% |
| 4412.91.51 | Other | Free |
| 4412.91.51.05 | Wood flooring | |
| 4412.91.51.15 | Other | |
| 4412.92 | Other, with at least one outer ply of nonconiferous wood: | |
| 4412.92.07.00 | Containing at least one layer of particle board | Free |
| 4412.92.11 | With a face ply of birch (Betula spp.) | Free |
| 4412.92.11.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | |
| 4412.92.11.30 | Not surface covered | |
| 4412.92.11.40 | Other | |
| 4412.92.31 | Other | 8% |
| 4412.92.31.20 | With a face ply of walnut (Juglans spp.) | |
| 4412.92.31.50 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length | |
| 4412.92.31.60 | Other, not surface covered | |
| 4412.92.31.70 | Other | |
| 4412.92.42.00 | Other | 8% |
| 4412.92.52 | Other | Free |
| 4412.92.52.05 | Wood flooring | |
| 4412.92.52.15 | Other | |
| 4412.99 | Other, with both outer plies of coniferous wood: | |
| 4412.99.58.00 | Containing at least one layer of particle board | Free |
| 4412.99.61.00 | With a face ply of Parana pine (Araucaria angustifolia) | Free |
| 4412.99.71.00 | With a face ply of European red pine (Pinus silvestris) | 3.4% |
| 4412.99.81.00 | Other | 8% |
| 4412.99.91.00 | Other | 5.1% |
| 4412.99.97.00 | Other | Free |
Exporting this product from the U.S.?
Exports are reported with Schedule B numbers. Heading 4412 has 29 of them; the first 12 are below. Schedule B lookup →
- 4412.10.0000PLYWOOD, VENEERED PANELS AND SIMILAR LAMINATED WOOD, OF BAMBOO
- 4412.31.0005PLYWOOD WITH AT LEAST ONE OUTER PLY OF TROPICAL WOOD SPECIFIED IN SUBHEADING NOTE 1 TO THIS CHAPTER, SOLELY OF SHEETS OF WOOD NOT GT 6MM IN THICKNESS
- 4412.33.0600PLYWOOD, FACE PLY OF BIRCH, CONSISTING SOLELY OF SHEETS OF WOOD, EACH PLY LT=6 MM (0.236 IN) THICK, NOT COVERED OR SURFACE COVERED WITH CLEAR MATERIAL
- 4412.33.2600PLYWOOD, FACE PLY OF WALNUT CONSISTING SOLELY OF SHEETS OF WOOD, EACH PLY LT=6 MM (0.236 IN) THICK, NOT COVERED OR SURFACE COVERED WITH CLEAR MATERIAL
- 4412.33.3200PLYWOOD W AT LEAST ONE OUTER PLY NONCONF WOOD OF SUBHEAD 441233, SOLELY SHEETS OF WOOD LT=6MM THCK, NOT COVERED/SURFACE COVERED W CLEAR MATERIAL NESOI
- 4412.33.5700PLYWOOD WITH AT LEAST ONE OUTER PLY OF NONCONIFEROUS WOOD OF SUBHEADING 4412.33, CONSISTING SOLELY OF SHEETS OF WOOD LT=6MM THICK, NESOI
- 4412.34.2600PLYWOOD, FACE PLY SPAN CEDAR CONSISTING SOLELY OF SHEETS OF WOOD, EACH PLY LT=6 MM (0.236 IN) THCK, NOT COVERED OR SURFACE COVERED WITH CLEAR MATERIAL
- 4412.34.3200PLYWOOD WITH AT LEAST ONE OUTER PLY OTHER NONCONIFEROUS WOOD, SOLELY SHEETS OF WOOD LT=6MM THCK, NOT COVERED/SURFACE COVERED WITH CLEAR MATERIAL NESOI
- 4412.34.5700PLYWOOD WITH AT LEAST ONE OUTER PLY OF OTHER NONCONIFEROUS WOOD, CONSISTING SOLELY OF SHEETS OF WOOD LT=6MM THICK, NESOI
- 4412.39.1000PLYWOOD, BOTH OUTER PLIES OF SOFTWOOD, AT LEAST ONE OUTER PLY OF PARANA PINE, SOLELY OF SHEETS OF WOOD, NOT/OR SURFACE COVERED WITH A CLEAR MATERIAL
- 4412.39.3000PLYWOOD, BOTH OUTER PLIES OF SOFTWOOD, AT LEAST ONE OUTER PLY OF EUROPEAN RED PINE, SOLELY WOOD, NOT/OR SURFACE COVERED WITH A CLEAR MATERIAL
- 4412.39.4010PLYWOOD, BOTH OUTER PLIES OF SOFTWOOD, AT LEAST ONE OUTER PLY OF DOUGLAS FIR, SOLELY OF SHEETS OF WOOD, NOT/OR SURFACE COVERED WITH A CLEAR MATERIAL
Source: U.S. International Trade Commission, Harmonized Tariff Schedule; Schedule B: U.S. Census Bureau. Information only, not legal or customs advice; U.S. Customs and Border Protection decides the classification and the duty. Confirm with a licensed customs broker before you ship.
Buying these products from the U.S.?
Tell us what you need and we will find U.S. manufacturers who can quote you. Free, no account needed.