Heading 7219: Flat-rolled products of stainless steel, of a width of 600 mm or more
Every line of heading 7219 in the U.S. Harmonized Tariff Schedule, with its general (column 1) duty rate. Open a code for the landed cost calculator, trade agreement rates and email alerts if the rate changes.
Flat-rolled products of stainless steel, of a width of 600 mm or more
Chapter 72: Iron and steel. Schedule checked on November 8, 2026.
Not always the total: additional chapter 99 duties (such as Section 232 or Section 301), antidumping or countervailing duties may apply depending on the country of origin. See recent chapter 99 changes →
Tariff lines
| HTS code | Official description | General rate |
|---|---|---|
| 7219.11.00 | Of a thickness exceeding 10 mm | Free |
| 7219.11.00.30 | Of a width not exceeding 1575 mm | |
| 7219.11.00.60 | Of a width exceeding 1575 mm | |
| 7219.12.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free |
| 7219.12.00.02 | Not annealed or not pickled | |
| 7219.12.00.06 | Of high-nickel alloy steel | |
| 7219.12.00.21 | Of a width not exceeding 1575 mm | |
| 7219.12.00.26 | Of a width exceeding 1575 mm | |
| 7219.12.00.51 | Of a width not exceeding 1575 mm | |
| 7219.12.00.56 | Of a width exceeding 1575 mm | |
| 7219.12.00.66 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | |
| 7219.12.00.71 | Other | |
| 7219.12.00.81 | Other | |
| 7219.13.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7219.13.00.02 | Not annealed or not pickled | |
| 7219.13.00.31 | Of a width of 1370 mm or more | |
| 7219.13.00.51 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | |
| 7219.13.00.71 | Other | |
| 7219.13.00.81 | Other | |
| 7219.14.00 | Of a thickness of less than 3 mm | Free |
| 7219.14.00.30 | Of a width of 1370 mm or more | |
| 7219.14.00.65 | Of high-nickel alloy steel | |
| 7219.14.00.90 | Other | |
| 7219.21.00 | Of a thickness exceeding 10 mm | Free |
| 7219.21.00.05 | Of high-nickel alloy steel | |
| 7219.21.00.20 | Of a width not exceeding 1575 mm | |
| 7219.21.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | |
| 7219.21.00.60 | Of a width exceeding 1880 mm | |
| 7219.22.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free |
| 7219.22.00.05 | Of high-nickel alloy steel | |
| 7219.22.00.15 | Of a width not exceeding 1575 mm | |
| 7219.22.00.20 | Of a width exceeding 1575 mm but not exceeding 1880 mm | |
| 7219.22.00.25 | Of a width exceeding 1880 mm | |
| 7219.22.00.35 | Of a width not exceeding 1575 mm | |
| 7219.22.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | |
| 7219.22.00.45 | Of a width exceeding 1880 mm | |
| 7219.22.00.70 | Of a width not exceeding 1575 mm | |
| 7219.22.00.75 | Of a width exceeding 1575 mm but not exceeding 1880 mm | |
| 7219.22.00.80 | Of a width exceeding 1880 mm | |
| 7219.23.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7219.23.00.30 | Of a width of 1370 mm or more | |
| 7219.23.00.60 | Other | |
| 7219.24.00 | Of a thickness of less than 3 mm | Free |
| 7219.24.00.30 | Of a width of 1370 mm or more | |
| 7219.24.00.60 | Other | |
| 7219.31.00 | Of a thickness of 4.75 mm or more | Free |
| 7219.31.00.10 | In coils | |
| 7219.31.00.50 | Not in coils | |
| 7219.32.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7219.32.00.05 | Of high-nickel alloy steel | |
| 7219.32.00.20 | Containing more than 0.5 percent by weight of nickel | |
| 7219.32.00.25 | Other | |
| 7219.32.00.35 | Of high-nickel alloy steel | |
| 7219.32.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | |
| 7219.32.00.38 | Other | |
| 7219.32.00.42 | Containing less than 15 percent by weight of chromium | |
| 7219.32.00.44 | Other | |
| 7219.32.00.45 | Of a width of 1370 mm or more | |
| 7219.32.00.60 | Other | |
| 7219.33.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free |
| 7219.33.00.05 | Of high-nickel alloy steel | |
| 7219.33.00.20 | Containing more than 0.5 percent by weight of nickel | |
| 7219.33.00.25 | Other | |
| 7219.33.00.35 | Of high-nickel alloy steel | |
| 7219.33.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | |
| 7219.33.00.38 | Other | |
| 7219.33.00.42 | Containing less than 15 percent by weight of chromium | |
| 7219.33.00.44 | Other | |
| 7219.33.00.45 | Of a width of 1370 mm or more | |
| 7219.33.00.70 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | |
| 7219.33.00.80 | Other | |
| 7219.34.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free |
| 7219.34.00.05 | Of high-nickel alloy steel | |
| 7219.34.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | |
| 7219.34.00.25 | Other | |
| 7219.34.00.30 | Containing less than 15 percent by weight of chromium | |
| 7219.34.00.35 | Other | |
| 7219.34.00.50 | Not in coils | |
| 7219.35.00 | Of a thickness of less than 0.5 mm | Free |
| 7219.35.00.05 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | |
| 7219.35.00.15 | Other | |
| 7219.35.00.30 | Containing less than 15 percent by weight of chromium | |
| 7219.35.00.35 | Other | |
| 7219.35.00.50 | Not in coils | |
| 7219.90.00 | Other | Free |
| 7219.90.00.10 | Of high-nickel alloy steel | |
| 7219.90.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | |
| 7219.90.00.25 | Other | |
| 7219.90.00.60 | Containing less than 15 percent by weight of chromium | |
| 7219.90.00.80 | Other |
Public records · unclaimed listings
U.S. manufacturers in this industry, from public records
These companies are not Fromerica members and did not write these listings: Fromerica created them from public government records and has not verified what the records say. You cannot contact them from here. Open a listing to see what the record says.
Is one of these your company? Find your listing and claim it →
Exporting this product from the U.S.?
Exports are reported with Schedule B numbers. Heading 7219 has 14 of them; the first 12 are below. Schedule B lookup →
- 7219.11.0000FLAT-ROLLED PRODUCTS OF STAINLESS STEEL 600MM WIDE OR MORE, NOT FURTHER WORKED THAN HOT ROLLED, IN COILS, OF A THICKNESS EXCEEDING 10MM
- 7219.12.0000FLAT-ROLLED PRODUCTS OF STAINLESS STEEL 600MM WIDE OR MORE, NOT FURTHER WORKED THAN HOT ROLLED, IN COILS, 4.75MM OR MORE BUT LESS THAN 10MM THICKESS
- 7219.13.0000FLAT-ROLLED STAINLESS STEEL PRODUCTS 600MM WIDE OR MORE, HOT ROLLED, IN COILS, OF A THICKNESS 3MM OR MORE BUT LESS THAN 4.75MM
- 7219.14.0000FLAT-ROLLED PRODUCTS OF STAINLESS STEEL 600MM WIDE OR MORE, NOT FURTHER WORKED THAN HOT ROLLED IN COILS, OF A THICKNESS LESS THAN 3MM
- 7219.21.0000FLAT-ROLLED STAINLESS STEEL 600MM WIDE OR MORE HOT-ROLLED NOT COILED OVER 10MM THICK
- 7219.22.0000FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE HOT-ROLLED, NOT COILED OF A THICKNESS 4.75MM OR MORE BUT NOT EXCEEDING 10MM
- 7219.23.0000FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE HOT-ROLLED, NOT COILED OF A THICKNESS OF 3MM OR MORE BUT LESS THAN 4.75MM
- 7219.24.0000FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE HOT-ROLLED NOT COILED LESS THAN 3MM THICK
- 7219.31.0000FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE, COLD-ROLLED, 4.75MM OR MORE THICK
- 7219.32.0000FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE, COLD-ROLLED, OF A THICKNESS OR 3MM OR MORE BUT LESS THAN 4.75MM
- 7219.33.0000FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE, COLD-ROLLED, EXCEEDING 1MM, BUT LESS THAN 3MM THICK
- 7219.34.0000FLAT-ROLLED STAINLESS STEEL 600MM OR MORE WIDE, COLD-ROLLED, OF A THICKNESS OF 0.5MM OR MORE BUT EXCEEDING 1MM
Source: U.S. International Trade Commission, Harmonized Tariff Schedule; Schedule B: U.S. Census Bureau. Information only, not legal or customs advice; U.S. Customs and Border Protection decides the classification and the duty. Confirm with a licensed customs broker before you ship.
Buying these products from the U.S.?
Tell us what you need and we will find U.S. manufacturers who can quote you. Free, no account needed.