Heading 7409: Copper plates, sheets and strip, of a thickness exceeding 0.15 mm
Every line of heading 7409 in the U.S. Harmonized Tariff Schedule, with its general (column 1) duty rate. Open a code for the landed cost calculator, trade agreement rates and email alerts if the rate changes.
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm
Chapter 74: Copper and articles thereof. Schedule checked on November 8, 2026.
Not always the total: additional chapter 99 duties (such as Section 232 or Section 301), antidumping or countervailing duties may apply depending on the country of origin. See recent chapter 99 changes →
Tariff lines
| HTS code | Official description | General rate |
|---|---|---|
| 7409.11 | In coils: | |
| 7409.11.10.00 | Of a thickness of 5 mm or more | 3% |
| 7409.11.50 | Of a thickness of less than 5 mm | 1% |
| 7409.11.50.10 | Of a width of 500 mm or more | |
| 7409.11.50.50 | Of a width of less than 500 mm | |
| 7409.19 | Other: | |
| 7409.19.10.00 | Of a thickness of 5 mm or more | 3% |
| 7409.19.50.00 | Of a width of 500 mm or more | 1% |
| 7409.19.90.00 | Of a width of less than 500 mm | 3% |
| 7409.21.00 | In coils | 1.9% |
| 7409.21.00.10 | Of a thickness of 5 mm or more | |
| 7409.21.00.50 | Of a width of 500 mm or more | |
| 7409.21.00.75 | Of a thickness less than 1.6 mm | |
| 7409.21.00.90 | Other | |
| 7409.29.00 | Other | 1.9% |
| 7409.29.00.10 | Of a thickness of 5 mm or more | |
| 7409.29.00.50 | Of a width of 500 mm or more | |
| 7409.29.00.75 | Of a thickness less than 1.6 mm | |
| 7409.29.00.90 | Other | |
| 7409.31 | In coils: | |
| 7409.31.10.00 | Of a thickness of 5 mm or more | 3% |
| 7409.31.50.00 | Of a width of 500 mm or more | 1.7% |
| 7409.31.90.00 | Of a width of less than 500 mm | 3% |
| 7409.39 | Other: | |
| 7409.39.10 | Of a thickness of 5 mm or more | 3% |
| 7409.39.10.30 | Of phosphor bronze | |
| 7409.39.10.60 | Other | |
| 7409.39.50.00 | Of a width of 500 mm or more | 1.7% |
| 7409.39.90 | Of a width of less than 500 mm | 3% |
| 7409.39.90.30 | Of phosphor bronze | |
| 7409.39.90.60 | Other | |
| 7409.40.00.00 | Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver) | 3% |
| 7409.90 | Of other copper alloys: | |
| 7409.90.10 | Of a thickness of 5 mm or more | 3% |
| 7409.90.10.30 | Of beryllium copper | |
| 7409.90.10.60 | Other | |
| 7409.90.50 | Of a width of 500 mm or more | 1.7% |
| 7409.90.50.30 | Of beryllium copper | |
| 7409.90.50.60 | Other | |
| 7409.90.90 | Of a width of less than 500 mm | 3% |
| 7409.90.90.30 | Of beryllium copper | |
| 7409.90.90.60 | Other |
Exporting this product from the U.S.?
Exports are reported with Schedule B numbers. Heading 7409 has 8 of them. Schedule B lookup →
- 7409.11.0000PLATES, SHEETS AND STRIP OF REFINED COPPER OVER 0.15MM THICK, IN COILS
- 7409.19.0000PLATES, SHEETS AND STRIP OF REFINED COPPER OVER 0.15MM THICK, NOT IN COILS
- 7409.21.0000PLATES, SHEETS AND STRIP OF BRASS OVER 0.15MM THICK, IN COILS
- 7409.29.0000PLATES, SHEETS AND STRIP OF BRASS OVER 0.15MM THICK, NOT IN COILS
- 7409.31.0000PLATES, SHEETS AND STRIP OF BRONZE OVER 0.15MM THICK, IN COILS
- 7409.39.0000PLATES, SHEETS AND STRIP OF BRONZE OVER 0.15MM THICK, NOT IN COILS
- 7409.40.0000PLATES, SHEET AND STRIP OF CU-NCKL BASE ALLOYS (CUPRO-NICKEL) OR COPPER-NICKEL-ZINC BASE ALLOYS (NICKEL SILVER)
- 7409.90.0000PLATES, SHEETS AND STRIP OF OTHER COPPER ALLOYS, OVER 0.15MM THICK
Source: U.S. International Trade Commission, Harmonized Tariff Schedule; Schedule B: U.S. Census Bureau. Information only, not legal or customs advice; U.S. Customs and Border Protection decides the classification and the duty. Confirm with a licensed customs broker before you ship.
Buying these products from the U.S.?
Tell us what you need and we will find U.S. manufacturers who can quote you. Free, no account needed.