Heading 8207: Interchangeable tools for handtools, whether or not power operated, or for machine-tools…
Every line of heading 8207 in the U.S. Harmonized Tariff Schedule, with its general (column 1) duty rate. Open a code for the landed cost calculator, trade agreement rates and email alerts if the rate changes.
Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof
Chapter 82: Tools, implements, cutlery and tableware of base metal. Schedule checked on November 8, 2026.
Not always the total: additional chapter 99 duties (such as Section 232 or Section 301), antidumping or countervailing duties may apply depending on the country of origin. See recent chapter 99 changes →
Tariff lines
| HTS code | Official description | General rate |
|---|---|---|
| 8207.13.00.00 | With working part of cermets | 3.6% |
| 8207.19 | Other, including parts: | |
| 8207.19.30 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | 5% |
| 8207.19.30.30 | Percussion rock drill bits | |
| 8207.19.30.60 | Rotary rock drill bits, core bits and reamers | |
| 8207.19.30.90 | Other | |
| 8207.19.60 | Other | 2.9% |
| 8207.19.60.30 | Percussion rock drill bits | |
| 8207.19.60.65 | With working part of diamonds | |
| 8207.19.60.70 | Other | |
| 8207.19.60.90 | Other | |
| 8207.20.00 | Dies for drawing or extruding metal, and parts thereof | 3.9% |
| 8207.20.00.30 | Diamond wire drawing dies | |
| 8207.20.00.40 | Other dies | |
| 8207.20.00.70 | Parts | |
| 8207.30 | Tools for pressing, stamping or punching, and parts thereof: | |
| 8207.30.30 | Suitable for cutting metal, and parts thereof | 5.7% |
| 8207.30.30.20 | Tools | |
| 8207.30.30.50 | Parts | |
| 8207.30.60 | Not suitable for cutting metal, and parts thereof | 2.9% |
| 8207.30.60.32 | Stamping dies not suitable for cutting metal | |
| 8207.30.60.62 | Metal forming dies, including thread-rolling dies | |
| 8207.30.60.92 | Other tools | |
| 8207.30.60.95 | Parts | |
| 8207.40 | Tools for tapping or threading, and parts thereof: | |
| 8207.40.30.00 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | 5.7% |
| 8207.40.60.00 | Other | 4.8% |
| 8207.50 | Tools for drilling, other than for rock drilling, and parts thereof: | |
| 8207.50.20 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | 5% |
| 8207.50.20.30 | Masonry drills | |
| 8207.50.20.45 | Brad point | |
| 8207.50.20.55 | Other | |
| 8207.50.20.70 | For woodworking | |
| 8207.50.20.80 | Other | |
| 8207.50.40 | Suitable for cutting metal, and parts thereof | 8.4% |
| 8207.50.40.30 | Twist drills | |
| 8207.50.40.60 | Other | |
| 8207.50.60.00 | For handtools, and parts thereof | 5.2% |
| 8207.50.80.00 | Other | 2.9% |
| 8207.60.00 | Tools for boring or broaching, and parts thereof | 4.8% |
| 8207.60.00.30 | Broaches | |
| 8207.60.00.35 | Reamers, except gun reamers | |
| 8207.60.00.61 | Other (including parts thereof) | |
| 8207.70 | Tools for milling, and parts thereof: | |
| 8207.70.30 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | 5% |
| 8207.70.30.30 | End milling cutters | |
| 8207.70.30.40 | Router bits for woodworking | |
| 8207.70.30.60 | Other | |
| 8207.70.60 | Other | 2.9% |
| 8207.70.60.30 | End milling cutters | |
| 8207.70.60.40 | Router bits not suitable for cutting metal | |
| 8207.70.60.60 | Other (including parts) | |
| 8207.80 | Tools for turning: | |
| 8207.80.30.00 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | 4.8% |
| 8207.80.60.00 | Other | 3.7% |
| 8207.90 | Other interchangeable tools, and parts thereof: | |
| 8207.90.15.00 | Files and rasps, including rotary files and rasps, and parts thereof | 1.6% |
| 8207.90.30 | Cutting tools with cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | 5% |
| 8207.90.30.30 | Hobs and other gear cutting tools | |
| 8207.90.30.75 | Cutterheads with interchangeable tools | |
| 8207.90.30.80 | Other | |
| 8207.90.30.85 | Other | |
| 8207.90.45.00 | Suitable for cutting metal, and parts thereof | 4.8% |
| 8207.90.60.00 | For handtools, and parts thereof | 4.3% |
| 8207.90.75 | Other | 3.7% |
| 8207.90.75.45 | Cutterheads with interchangeable tools | |
| 8207.90.75.85 | Other |
Public records · unclaimed listings
U.S. manufacturers in this industry, from public records
These companies are not Fromerica members and did not write these listings: Fromerica created them from public government records and has not verified what the records say. You cannot contact them from here. Open a listing to see what the record says.
- A. N. DESIGNS, INC.
- CIDRA CORPORATE SERVICES LLC
- DRILL MASTERS-ELDORADO TOOL, INC.
- KELL-STROM TOOL CO., INCORPORATED THE
- MASTERCRAFT TOOL AND MACHINE CO.
Is one of these your company? Find your listing and claim it →
And 3 more in the public records. See all →
Exporting this product from the U.S.?
Exports are reported with Schedule B numbers. Heading 8207 has 28 of them; the first 12 are below. Schedule B lookup →
- 8207.13.0000ROCK DRILLING OR EARTH BORING TOOLS WITH WORKING PART OF CERMETS, AND PARTS THEREOF
- 8207.19.1030PERCUSSION ROCK DRILL BITS, CORE BITS AND REAMERS, OF BASE METAL, AND PARTS THEREOF
- 8207.19.2030ROTARY ROCK DRILL BITS, CORE BITS AND REAMERS OF BASE METAL, AND PARTS THEREOF
- 8207.19.5030ROCK DRILLING OR EARTH BORING TOOLS OF BASE METALS, NESOI, AND PARTS THEREOF
- 8207.20.0000DIES FOR DRAWING OR EXTRUDING METAL, AND PARTS THEREOF
- 8207.30.3000TOOLS FOR PRESSING, STAMPING OR PUNCHING, SUITABLE FOR CUTTING METAL, AND PARTS THEREOF
- 8207.30.6030STAMPING DIES AND PARTS, NOT SUITABLE FOR CUTTING METAL
- 8207.30.6060DIES, METAL FORMING AND THREAD ROLLING, NOT SUITABLE FOR CUTTING METAL AND PARTS THEREOF
- 8207.30.6090TOOLS NESOI FOR PRESSING STAMPING PUNCHING NOT SUITABLE FOR CUTTING METAL AND PARTS THEREOF
- 8207.40.0000TOOLS FOR TAPPING OR THREADING, PARTS THEREOF, OF BASE METAL
- 8207.50.2030MASONRY DRILLS, NOT FOR ROCK DRILLING, WITH CUTTING PARTS OVER 0.2 PCT CHROMIUM, MOLYBDENUM, TUNGSTEN, OR OVER 0.1 PCT VANADIUM BY WEIGHT
- 8207.50.2045BRAD POINT TWIST DRILLS, NT FOR ROCK DRILLING, WITH CUTTING PART OVER 0.2 PCT CHROMIUM, MOLYBDENUM, TUNGSTEN, OR OVER 0.1 PCT VANADIUM BY WEIGHT
Source: U.S. International Trade Commission, Harmonized Tariff Schedule; Schedule B: U.S. Census Bureau. Information only, not legal or customs advice; U.S. Customs and Border Protection decides the classification and the duty. Confirm with a licensed customs broker before you ship.
Buying these products from the U.S.?
Tell us what you need and we will find U.S. manufacturers who can quote you. Free, no account needed.